SMPTE ST 2110 video-over-IP and SDI/ASI multi-channel I/O board:
2 25G/10G Ethernet SFP28 interfaces for video capture and play back directly into 2110 IP based broadcast systems;
2 HD-BNC connectors, each of which can function as an input or output depending on the configuration specified by the user. SD/3G/6G/12G-SDI;
1 HD-BNC Connector for analog sync signal (Black Burst, Tri-level sync).
The FD2110 Board Specification
Bus
PCI Express x8 (3.0)
Interfaces
2x SFP28 – 25G and 10G Ethernet – 25G-BASE-CR-S – 25G-BASE-KR-S – 10G-BASE-CR – 10G-BASE-KR 2x HD-BNC connectors – any one can be used as input or output for connecting SDI/ASI signals: – SD-SDI: SMPTE 259M – HD-SDI: SMPTE 292M, SMPTE 274M, SMPTE 296M – 3G-SDI: SMPTE ST 424, SMPTE ST 425-1 – 6G-SDI: SMPTE ST 2081 – 12G-SDI: SMPTE ST 2082 – ASI (EN50083-9) 1 x HD-BNC input for connecting an external analog sync source: – Black Burst – Tri-level sync
Up to 16 channels 1080i60/59.94/50, 1080p30/29.97/25/24/23.98 and lower Up to 8 channels 1080p60/59.94/50 Up to 4 channels 2160p30/29.97/25/24/23.98 Up to 2 channels 2160p60/59.94/50
Internal video data processing
YCbCr 4:2:2 8, 10 bit
Supported Standards
SMPTE ST 2110 SMPTE ST 2022-7 IEEE-1588 (PTPv2) NTP
Supported OS
Windows – Direct Show, Low-level SDK Linux – Video for Linux (V4L2)
Audio
Up to 16 mono channel per input/configurable audio delay
Synchronization
From PTP, NTP network time servers From external analog sync source (Black Burst, Tri-level sync) From any of the board inputs Black Burst, Tri-level sync output for synchronizing external devices
