3G/UltraHD/HD/SD SDI, ASI multi-channel I/O board.
8 HD-BNC connectors, each of which can function as an input or output depending on the configuration specified by the user. Connector for analog sync signal (Black Burst, Tri-level sync). Mixed mode operation: SD SDI + HD SDI, SDI + ASI, etc. There is a Fill + Key mode for external mixing.
Low profile PCI-Express x4 card. Drivers for Windows and Linux.
The FD788 Board Specification
Bus
PCI Express x4 (2.0)
Inputs and outputs
1 x HD-BNC input for connecting an external analog sync source (Black Burst, Tri-level sync) 8 x HD-BNC connectors – any one can be used as input or output for connecting SDI/ASI signals. The configuration is defined by the user. The HD-BNC-> BNC adapters for connection input and output signals to board are included.
Signal formats
SD-SDI: SMPTE 259M HD-SDI: SMPTE 292M, SMPTE 274M, SMPTE 296M 3G-SDI: SMPTE ST 424, SMPTE ST 425-1 UHDTV: Quad-link 3G-SDI SMPTE ST 425-5 (4SI) UHDTV: Dual-link 3G-SDI SMPTE ST 425-4 (2SI) ASI (EN50083-9) Bit rate 0..213 Mbps
Up to 8 channels in SD / HD-SDI or ASI modes Up to 4 channels in 3G-SDI mode 1 channel in Ultra HD-SDI mode 2160p: 50/59.94/60 (Quad-link) 2 channels in Ultra HD-SDI mode 2160p: 23.98/24/25/29.97/30 (Dual-link) Mixed SD-SDI + HD-SDI modes Mixed ASI + SDI modes
Supported OS
Windows – Direct Show, SoftLab-NSK SDK Linux – Video for Linux (V4L2)
Audio
Up to 16 mono channel per input/configurable audio delay
Synchronization
From external analog sync source (Black Burst, Tri-level sync) From the first two inputs of the board From NTP network time servers Software synchronization from another boards of the same type in the same PC
